Publications by authors named "Chun-Li Lin"

Claim this Profile
M
Mechanical assessment of a titanium cervical spine corpectomy cage assembled with 3D-printed patient-specific endplate-conformed contact surfaces and a traditionally manufactured expandable mechanism.
Shih-Chieh Shen, Shao-Fu Huang, Wei-Hsiang Sun, Chun-Li Lin

3D Print Med· October 2025

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
S
Short Expandable-Wing Suture Anchor for Osteoporotic and Small Bone Fixation: Validation in a 3D-Printed Coracoclavicular Reconstruction Model.
Chia-Hung Tsai, Shao-Fu Huang, Rong-Chen Lin, Pao-Wei Lee, Cheng-Ying Lee, Chun-Li Lin

J Funct Biomater· October 2025

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
A
A Dual-Thread Lag-Locking Screw Enhances Single Lateral Plate Fixation in Bicondylar Tibial Plateau Fractures: A Biomechanical Study.
Ya-Han Chan, Hsuan-Wen Wang, Wei-Che Tsai, Chun-Li Lin

Bioengineering (Basel)· September 2025

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
P
Platelet-Rich Fibrin Synthetic Bone Graft Enhances Bone Regeneration and Mechanical Strength in Rabbit Femoral Defects: Micro-CT and Biomechanical Study.
Yu-Kuan Lin, Hsuan-Wen Wang, Po-Kuei Wu, Chun-Li Lin

J Funct Biomater· July 2025

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
E
Early stage prediction of bone regeneration using FEA and cell differentiation algorithms with 3D-printed PLA and PCL scaffolds: modeling and application to dorsal double-plating in distal radius fractures.
Hsuan Chih Liu, Ya-Han Chan, Shao-Fu Huang, Wei-Che Tsai, Yen Cheng, Chun-Li Lin

3D Print Med· June 2025

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
B
Biomechanical Design and Validation of a Novel Elliptical Sleeve Pedicle Screw for Enhanced Spinal Fixation Stability.
Ting-Shuo Hsu, Chang-Jung Chiang, Hsuan-Wen Wang, Yu-San Chen, Chun-Li Lin

Bioengineering (Basel)· June 2025

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
I
Increasing Nebulizer Spray Efficiency Using a Baffle with a Conical Surface: A Computational Fluid Dynamics Analysis.
Hung-Chieh Wu, Fu-Lun Chen, Yuan-Ching Chiang, Yi-June Lo, Chun-Li Lin

Bioengineering (Basel)· June 2025

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
S
Standardized Morphological Modeling and Simulation-Based Validation of a Novel Tibiotalar Fusion Implant.
Chao-Wei Huang, Yu-Tzu Wang, Chi-An Chen, Chun-Li Lin

Bioengineering (Basel)· June 2025

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
B
Biomechanical design considerations of a 3D-printed tibiotalocalcaneal nail for ankle joint fusion.
Kin Weng Wong, Shao-Fu Huang, Skye Hsin-Hsien Yeh, Tai-Hua Yang, Cheng-Yi Liang, Chun-Li Lin

3D Print Med· May 2025

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
B
Bioabsorbable magnesium-based bulk metallic glass composite (BMGC) for improved medial opening wedge high tibial osteotomy in knee osteoarthritis.
Kuan-Hao Chen, Pei-Chun Wong, Lekha Rethi, Wei-Ru Wang, Chieh-Ying Chen, Chun-Li Lin

J Orthop Translat· January 2025

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
B
Biomechanical analysis of tibial plateau posterolateral fracture fragment fixation and introduction of a lateral tibia plateau hook plate system.
Chien-Shun Wang, Hsuan-Wen Wang, Kun-Chun Chen, Chun-Li Lin

J Orthop Sci· July 2024

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
D
Development and verification of a novel bone collector with automatic size separating function for orthopedics surgery.
Kin-Weng Wong, Hsuan-Wen Wang, Chi-Sheng Chien, Chia-Hsuan Li, Cun-Bin Li, Chun-Li Lin

Expert Rev Med Devices· July 2024

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
E
Evaluation optimum ratio of synthetic bone graft material and platelet rich fibrin mixture in a metal 3D printed implant to enhance bone regeneration.
Kin Weng Wong, Yu-San Chen, Chun-Li Lin

J Orthop Surg Res· May 2024

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
C
CFD Study of the Effect of the Angle Pattern on Iliac Vein Compression Syndrome.
Hsuan-Wei Chen, Chao-Hsiang Chen, Yu-Jui Fan, Chun-Yu Lin, Wen-Hsien Hsu, Chun-Li Lin

Bioengineering (Basel)· June 2023

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
D
Designing an anatomical contour titanium 3D-printed oblique lumbar interbody fusion cage with porous structure and embedded fixation screws for patients with osteoporosis.
Po-Liang Lai, Shao-Fu Huang, Hsuan-Wen Wang, Pei-Hsin Liu, Chun-Li Lin

Int J Bioprint· June 2023

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
B
Biomechanical evaluation of a novel tri-blade titanium implantable vertebral augmentation device.
Chi-Tun Tang, Tzu-Tsao Chung, Huang-Chien Liang, Chun-Li Lin

Spine J· May 2023

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
T
The deformities of acute diaphyseal clavicular fractures: a three-dimensional analysis.
Yi-Hsuan Chao, Ying-Chao Chou, Chun-Li Lin

Biomed Eng Online· May 2023

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
B
Biomechanical evaluation of an osteoporotic anatomical 3D printed posterior lumbar interbody fusion cage with internal lattice design based on weighted topology optimization.
Shao-Fu Huang, Chun-Ming Chang, Chi-Yang Liao, Yi-Ting Chan, Zi-Yi Li, Chun-Li Lin

Int J Bioprint· March 2023

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
F
Fracture edge features of diaphyseal clavicular fractures: a morphologic study.
Yi-Hsuan Chao, Ying-Chao Chou, Chun-Li Lin

J Shoulder Elbow Surg· January 2023

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
A
Assessment of Lumbar Vertebrae Morphology by Computed Tomography in Older Adults with Osteoporosis.
Chi-Yang Liao, Chia-Liang Chien, Ta-Wei Pu, Shin-Chieh Shen, Chien-Yi Yang, Chun-Li Lin

Curr Med Imaging· September 2022

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
F
Factors influencing mosaicism: a retrospective analysis.
Qiu-Xiang Huang, Zhi-Hong Wang, Wu-Jian Huang, Li-Hua Mao, Chun-Li Lin, Yu-Lin Lin, Ling-Yun He

Reprod Biomed Online· September 2022

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
D
Development of a Novel Hybrid Suture Anchor for Osteoporosis by Integrating Titanium 3D Printing and Traditional Machining.
Chih-Hwa Chen, Wen-Jen Chang, Yu-San Chen, Kuan Hao Chen, Shao-Fu Huang, Chun-Li Lin

Int J Bioprint· August 2022

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
D
Development and Biomechanical Evaluation of an Anatomical 3D Printing Modularized Proximal Inter-Phalangeal Joint Implant Based on the Computed Tomography Image Reconstructions.
Yi-Chao Hunag, Chun-Ming Chang, Shao-Fu Huang, Chia-Heng Hong, Chun-Li Lin

Int J Bioprint· June 2022

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
B
Biomechanical Analysis and Design Method for Patient-Specific Reconstructive Implants for Large Bone Defects of the Distal Lateral Femur.
Po-Kuei Wu, Cheng-Wei Lee, Wei-Hsiang Sun, Chun-Li Lin

Biosensors (Basel)· December 2021

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
D
Design Criteria for Patient-specific Mandibular Continuity Defect Reconstructed Implant with Lightweight Structure using Weighted Topology Optimization and Validated with Biomechanical Fatigue Testing.
Chun-Li Lin, Yu-Tzu Wang, Chun-Ming Chang, Cheng-Hsien Wu, Wei-Heng Tsai

Int J Bioprint· December 2021

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis