Publications by authors named "Clemens Holzer"

Claim this Profile
H
How Method Matters: The Impact of Material Characterisation Techniques on Liquid Silicone Rubber Injection Moulding Simulations.
Maurício Azevedo, Silvester Bolka, Clemens Holzer

Polymers (Basel)· November 2025

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
P
Process optimization to produce anisotropic NdFeB permanent magnets from recycled powder via powder extrusion.
Stefan Rathfelder, Stephan Schuschnigg, Christian Kukla, Clemens Holzer, Dieter Suess

Sci Rep· October 2025

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
P
Production of Anisotropic NdFeB Permanent Magnets with In Situ Magnetic Particle Alignment Using Powder Extrusion.
Stefan Rathfelder, Stephan Schuschnigg, Christian Kukla, Clemens Holzer, Dieter Suess

Materials (Basel)· August 2025

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
I
Investigating the Aging Behavior of High-Density Polyethylene and Polyketone in a Liquid Organic Hydrogen Carrier.
Jyothsna Surisetty, Mohammadhossein Sharifian, Thomas Lucyshyn, Clemens Holzer

Polymers (Basel)· November 2023

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
I
Influence of the Print Envelope Temperature on the Morphology and Tensile Properties of Thermoplastic Polyolefins Fabricated by Material Extrusion and Material Jetting Additive Manufacturing.
Lukas Hentschel, Sandra Petersmann, Frank Kynast, Ute Schäfer, Clemens Holzer

Polymers (Basel)· September 2023

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
E
Effects of Different Polypropylene (PP)-Backbones in Aluminium Feedstock for Fused Filament Fabrication (FFF).
Vahid Momeni, Zahra Shahroodi, Joamin Gonzalez-Gutierrez, Lukas Hentschel, Ivica Duretek, Clemens Holzer

Polymers (Basel)· July 2023

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
E
Enhancing High-Pressure Capillary Rheometer Viscosity Data Calculation with the Propagation of Uncertainties for Subsequent Cross-Williams, Landel, and Ferry (WLF) Parameter Fitting.
Martin Hubmann, Stephan Schuschnigg, Ivica Ðuretek, Jonas Groten, Clemens Holzer

Polymers (Basel)· July 2023

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
R
Research Progress on Low-Pressure Powder Injection Molding.
Vahid Momeni, Margarete Hufnagl, Zahra Shahroodi, Joamin Gonzalez-Gutierrez, Stephan Schuschnigg, Clemens Holzer

Materials (Basel)· December 2022

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
I
Influence of Binder Composition and Material Extrusion (MEX) Parameters on the 3D Printing of Highly Filled Copper Feedstocks.
Mahrukh Sadaf, Santiago Cano, Joamin Gonzalez-Gutierrez, Mario Bragaglia, Stephan Schuschnigg, Clemens Holzer

Polymers (Basel)· November 2022

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
P
Peroxide-Based Crosslinking of Solid Silicone Rubber, Part I: Insights into the Influence of Dicumylperoxide Concentration on the Curing Kinetics and Thermodynamics Determined by a Rheological Approach.
Maurício Azevedo, Anna-Maria Monks, Roman C Kerschbaumer, Sandra Schlögl, Clemens Holzer

Polymers (Basel)· October 2022

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
E
Effect of Increased Powder-Binder Adhesion by Backbone Grafting on the Properties of Feedstocks for Ceramic Injection Molding.
Laleh Ghasemi-Mobarakeh, Santiago Cano, Vahid Momeni, Dongyan Liu, Ivica Duretek, Clemens Holzer

Polymers (Basel)· September 2022

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
I
Influence of the Mold Material on the Injection Molding Cycle Time and Warpage Depending on the Polymer Processed.
Thomas Lucyshyn, Lara-Vanessa Des Enffans d'Avernas, Clemens Holzer

Polymers (Basel)· September 2021

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
P
Processing Conditions of a Medical Grade Poly(Methyl Methacrylate) with the Arburg Plastic Freeforming Additive Manufacturing Process.
Lukas Hentschel, Frank Kynast, Sandra Petersmann, Clemens Holzer, Joamin Gonzalez-Gutierrez

Polymers (Basel)· November 2020

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
B
Biofunctional Glycol-Modified Polyethylene Terephthalate and Thermoplastic Polyurethane Implants by Extrusion-Based Additive Manufacturing for Medical 3D Maxillofacial Defect Reconstruction.
Matthias Katschnig, Juergen Wallner, Thomas Janics, Christoph Burgstaller, Wolfgang Zemann, Clemens Holzer

Polymers (Basel)· August 2020

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
I
Influence of the Infill Orientation on the Properties of Zirconia Parts Produced by Fused Filament Fabrication.
Santiago Cano, Tanja Lube, Philipp Huber, Alberto Gallego, Juan Alfonso Naranjo, Clemens Holzer

Materials (Basel)· July 2020

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
O
Optimization of the 3D Printing Parameters for Tensile Properties of Specimens Produced by Fused Filament Fabrication of 17-4PH Stainless Steel.
Damir Godec, Santiago Cano, Clemens Holzer, Joamin Gonzalez-Gutierrez

Materials (Basel)· February 2020

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
P
Physical Foaming and Crosslinking of Polyethylene with Modified Talcum.
Anna Kaltenegger-Uray, Gisbert Rieß, Thomas Lucyshyn, Clemens Holzer, Wolfgang Kern

Polymers (Basel)· September 2019

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
M
Mechanical Recyclability of Polypropylene Composites Produced by Material Extrusion-Based Additive Manufacturing.
Martin Spoerk, Florian Arbeiter, Ivan Raguž, Clemens Holzer, Joamin Gonzalez-Gutierrez

Polymers (Basel)· August 2019

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
C
Cell Morphology on Poly(methyl methacrylate) Microstructures as Function of Surface Energy.
Matthias Katschnig, Boris Maroh, Natascha Andraschek, Sandra Schlögl, Ulrike Zefferer, Clemens Holzer

Int J Biomater· May 2019

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
A
Additive Manufacturing of Metallic and Ceramic Components by the Material Extrusion of Highly-Filled Polymers: A Review and Future Perspectives.
Joamin Gonzalez-Gutierrez, Santiago Cano, Stephan Schuschnigg, Christian Kukla, Janak Sapkota, Clemens Holzer

Materials (Basel)· May 2018

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
O
Optimisation of the Adhesion of Polypropylene-Based Materials during Extrusion-Based Additive Manufacturing.
Martin Spoerk, Joamin Gonzalez-Gutierrez, Christof Lichal, Hrvoje Cajner, Gerald Roman Berger, Clemens Holzer

Polymers (Basel)· May 2018

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
C
Calculation of the Contact Angle of Polymer Melts on Tool Surfaces from Viscosity Parameters.
Gernot Zitzenbacher, Hannes Dirnberger, Manuel Längauer, Clemens Holzer

Polymers (Basel)· December 2017

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
A
A Review of Multiscale Computational Methods in Polymeric Materials.
Ali Gooneie, Stephan Schuschnigg, Clemens Holzer

Polymers (Basel)· January 2017

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
A
Atomistic Modelling of Confined Polypropylene Chains between Ferric Oxide Substrates at Melt Temperature.
Ali Gooneie, Joamin Gonzalez-Gutierrez, Clemens Holzer

Polymers (Basel)· October 2016

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
N
Near Infrared Investigation of Polypropylene-Clay Nanocomposites for Further Quality Control Purposes-Opportunities and Limitations.
Andreas Witschnigg, Stephan Laske, Clemens Holzer, Raj Patel, Atif Khan

Materials (Basel)· August 2015

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis