Publications by authors named "Dae-Cheol Ko"

Claim this Profile
M
Multi-Objective Optimization Using Deep Neural Network and Grey Relational Analysis for Optimal Lay-Up of CFRP Structure.
Min-Gi Kim, Jae-Chang Ryu, Chan-Joo Lee, Jin-Seok Jang, Do-Hoon Shin, Dae-Cheol Ko

Materials (Basel)· November 2025

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
S
Structural Evaluation of Steel/CFRP Hybrid Part Using Progressive Damage Model and Cohesive Zone Model.
Jae-Chang Ryu, Min-Gi Kim, Joon-Young Seo, Chan-Joo Lee, Do-Hoon Shin, Dae-Cheol Ko

Materials (Basel)· November 2025

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
M
Multi-Load Topology Optimization Design for the Structural Safety Maintenance of Low- and Intermediate-Level Radioactive Waste Packaging Containers in the Case of a Collision.
Jeong-In Lee, Sang-Wook Park, Hye-Jin Song, Yong-Jae Cho, Dong-Hwan Kim, Dae-Cheol Ko

Materials (Basel)· August 2024

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
P
Prediction of the Interface Behavior of a Steel/CFRP Hybrid Part Manufactured by Stamping.
Jae-Chang Ryu, Chan-Joo Lee, Do-Hoon Shin, Dae-Cheol Ko

Materials (Basel)· August 2024

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
A
A Methodological Approach for Motor Selection in Dental Impression Material Dispensers Using Experimental and Image Analysis Techniques.
Ji-Min Hwang, Sang-Wook Park, Ji-Su Jeong, Ji-Wook Kim, Dae-Cheol Ko

Materials (Basel)· March 2024

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
S
Spring-In Prediction of CFRP Part Using Coupled Analysis of Forming and Cooling Processes in Stamping.
Jae-Chang Ryu, Chan-Joo Lee, Jin-Seok Jang, Dae-Cheol Ko

Materials (Basel)· February 2024

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
T
The Effect of Boron (B) and Copper (Cu) on the Microstructure and Graphite Morphology of Spheroidal Graphite Cast Iron.
Jin-Su Ha, Ji-Woo Hong, Ji-Wook Kim, Soo-Bin Han, Chang-Young Choi, Dae-Cheol Ko

Materials (Basel)· June 2023

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
P
Prediction of Extrusion Machine Stem Fatigue Life Using Structural and Fatigue Analysis.
Dong-Yul Kim, Ji-Wook Kim, Jin-Su Ha, A-Ra Jo, Sung-Yun Lee, Dae-Cheol Ko

Materials (Basel)· April 2023

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
F
Facet Connectivity-Based Estimation Algorithm for Manufacturability of Supportless Parts Fabricated via LPBF.
Seung-Yeop Lee, Jae-Wook Lee, Min-Seok Yang, Da-Hye Kim, Hyun-Gug Jung, Dae-Cheol Ko

Materials (Basel)· January 2023

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
I
Influence of the surface flaws in oil-tempered wires on the fatigue life of automotive engine valve springs.
Dae-Cheol Ko, Nam-Sik Ahn, Kyung-Hun Lee

Sci Rep· December 2022

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
D
Design of an Intermediate Die for the Multi-Pass Shape Drawing Process.
Jeong-Hun Kim, Jeong-Hyun Park, Kwang-Seok Lee, Dae-Cheol Ko, Kyung-Hun Lee

Materials (Basel)· October 2022

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
A
Approximation Model Development and Dynamic Characteristic Analysis Based on Spindle Position of Machining Center.
Ji-Wook Kim, Dong-Yul Kim, Hong-In Won, Yoo-Jeong Noh, Dae-Cheol Ko

Materials (Basel)· October 2022

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
N
Novel Approach toward the Forming Process of CFRP Reinforcement with a Hot Stamped Part by Prepreg Compression Molding.
Jae-Hong Kim, Yong-Hun Jung, Francesco Lambiase, Young-Hoon Moon, Dae-Cheol Ko

Materials (Basel)· July 2022

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
A
A Study on the Mechanical Properties of an Automobile Part Additively Printed through Periodic Layer Rotation Strategies.
Min-Seok Yang, Ji-Heon Kang, Ji-Wook Kim, Kun-Woo Kim, Da-Hye Kim, Dae-Cheol Ko

Materials (Basel)· December 2021

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
P
Prediction of the Delamination at the Steel and CFRP Interface of Hybrid Composite Part.
Jun-Su Park, Jae-Hong Kim, Joon-Hong Park, Dae-Cheol Ko

Materials (Basel)· October 2021

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
A
A State-of-the-Art Review on Advanced Joining Processes for Metal-Composite and Metal-Polymer Hybrid Structures.
Francesco Lambiase, Silvia Ilaria Scipioni, Chan-Joo Lee, Dae-Cheol Ko, Fengchao Liu

Materials (Basel)· April 2021

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
D
Design of Center Pillar with Composite Reinforcements Using Hybrid Molding Method.
Ji-Heon Kang, Jae-Wook Lee, Jae-Hong Kim, Tae-Min Ahn, Dae-Cheol Ko

Materials (Basel)· April 2021

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
E
Effect of a Multiple Reduction Die on the Residual Stress of Drawn Materials.
Jeong-Hun Kim, Chang-Hyun Baek, Sang-Kon Lee, Jong-Hun Kang, Joon-Hong Park, Dae-Cheol Ko

Materials (Basel)· March 2021

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
D
Design of Multi-Stage Roll Die Forming Process for Drum Clutch with Artificial Neural Network.
Jae-Hong Kim, Jae-Chang Ryu, Woo-Sik Jang, Joon-Hong Park, Young-Hoon Moon, Dae-Cheol Ko

Materials (Basel)· December 2020

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
F
Feasibility of Reduced Ingot Hot-Top Height for the Cost-Effective Forging of Heavy Steel Ingots.
Nam Yong Kim, Dae-Cheol Ko, Yangjin Kim, Sang Wook Han, Il Yeong Oh

Materials (Basel)· June 2020

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
D
Design of Lightweight CFRP Automotive Part as an Alternative for Steel Part by Thickness and Lay-Up Optimization.
Jeong-Min Lee, Byeong-Jin Min, Joon-Hong Park, Dong-Hwan Kim, Byung-Min Kim, Dae-Cheol Ko

Materials (Basel)· July 2019

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
E
Effect from cyclic fatigue of nickel-titanium rotary files on torsional resistance.
Ju-Yeong Kim, Gary Shun-Pan Cheung, Se-Hee Park, Dae-Cheol Ko, Jin-Wook Kim

J Endod· April 2012

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis