Publications by authors named "Felicitas Mayinger"

Claim this Profile
I
Impact of different post-polymerization protocols on the material properties of three printed dental resins.
Sophie Gekle, Felicitas Mayinger, Ursula Kreitmair, Marcel Reymus, Moritz Hoffmann

J Mech Behav Biomed Mater· December 2025

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
I
Impact of polishing, glazing and firing, restoration thickness, point of loading and aging on the edge chipping resistance of lithium silicate ceramics.
Carola Irlinger, Bogna Stawarczyk, John Meinen, Daniel Edelhoff, Felicitas Mayinger

J Mech Behav Biomed Mater· October 2025

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
I
Impact of Glazing, Coating, and Polishing on the Color Stability and Surface Properties of a 3D Printed Resin and Two Veneering Composite Resins.
Marie Lask, Felicitas Mayinger, Marcel Reymus, John Meinen, Bogna Stawarczyk

J Esthet Restor Dent· July 2025

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
S
Surface Pretreatment Protocols For Indirect/Semi-Direct Dental Restorations: A Cross-Sectional Survey and Expert Consensus.
Felicitas Mayinger, Valerie Lankes, Malgorzata Roos, Nadja Rohr, Alexis Ioannidis

J Adhes Dent· June 2025

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
E
Effect of Filler Type, Content, and Silanization on the Flexural Strength, Elastic Modulus, Shore D Hardness, and Two-Body Wear of PAEK Compounds.
Felix Schmeiser, Wofgang Schramm, Felicitas Mayinger, Uwe Baumert, Bogna Stawarczyk

Materials (Basel)· June 2025

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
M
Mechanical properties of 3D printed denture base polymers.
Andrea Coldea, Felicitas Mayinger, John Meinen, Moritz Hoffmann, Bogna Stawarczyk

J Prosthet Dent· May 2025

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
I
Influence of silver coated zeolite fillers on the chemical and mechanical properties of 3D-printed polyphenylene sulfone restorations.
Felicitas Mayinger, Andrea Lösch, Elena Reznikova, Christian Wilhelm, Bogna Stawarczyk

J Mech Behav Biomed Mater· December 2024

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
I
Impact of varnishing, coating, and polishing on the chemical and mechanical properties of a 3D printed resin and two veneering composite resins.
Marie Lask, Bogna Stawarczyk, Marcel Reymus, John Meinen, Felicitas Mayinger

J Prosthet Dent· August 2024

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
I
Impact of the sintering parameters on the grain size, crystal phases, translucency, biaxial flexural strength, and fracture load of zirconia materials.
Felicitas Mayinger, Andreas Ender, Monika Strickstrock, Adham Elsayed, Parissa Nassary Zadeh

J Mech Behav Biomed Mater· July 2024

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
F
Fracture toughness, work of fracture, flexural strength and elastic modulus of 3D-printed denture base resins in two measurement environments after artificial aging.
Veronika Geiger, Felicitas Mayinger, Moritz Hoffmann, Marcel Reymus, Bogna Stawarczyk

J Mech Behav Biomed Mater· February 2024

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
I
Influence of different surface finishing procedures of strength-gradient multilayered zirconia crowns on two-body wear and fracture load: Lithium silicate or leucite glazing versus polishing?
Moritz Hoffmann, Felicitas Mayinger, Bogna Stawarczyk

J Mech Behav Biomed Mater· February 2024

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
D
Digital versus conventional veneering of zirconia and cobalt chromium crowns: Fracture load before and after thermomechanical aging.
Felicitas Mayinger, John Meinen, Andrea Coldea, Marcus Zimmermann, Bogna Stawarczyk

J Prosthet Dent· August 2023

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
T
Three-Dimensional Printed Resin: Impact of Different Cleaning Protocols on Degree of Conversion and Tensile Bond Strength to a Composite Resin Using Various Adhesive Systems.
Valerie Lankes, Marcel Reymus, Felicitas Mayinger, Andrea Coldea, Anja Liebermann

Materials (Basel)· May 2023

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
W
Water sorption, water solubility, degree of conversion, elastic indentation modulus, edge chipping resistance and flexural strength of 3D-printed denture base resins.
Veronika Greil, Felicitas Mayinger, Marcel Reymus, Bogna Stawarczyk

J Mech Behav Biomed Mater· January 2023

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
I
Impact of the material and sintering protocol, layer thickness, and thermomechanical aging on the two-body wear and fracture load of 4Y-TZP crowns.
Felicitas Mayinger, Ramona Buser, Maximilian Laier, Lisa Marie Schönhoff, Matthias Kelch

Clin Oral Investig· November 2022

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
T
Three-dimensionally printed and milled polyphenylene sulfone materials in dentistry: Tensile bond strength to veneering composite resin and surface properties after different pretreatments.
Lisa Marie Schönhoff, Felicitas Mayinger, Marlis Eichberger, Andrea Lösch, Elena Reznikova

J Prosthet Dent· July 2022

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
C
Chemical and mechanical properties of dual-polymerizing core build-up materials.
Matthias Kelch, Bogna Stawarczyk, Felicitas Mayinger

Clin Oral Investig· July 2022

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
M
Methodology investigation: Impact of crown geometry, crown, abutment and antagonist material and thermal loading on the two-body wear of dental materials.
Felix Schmeiser, Fee Arbogast, Hendrik Ruppel, Felicitas Mayinger, Marcel Reymus

Dent Mater· February 2022

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
T
Time-dependent degree of conversion, Martens parameters, and flexural strength of different dual-polymerizing resin composite luting materials.
Matthias Kelch, Bogna Stawarczyk, Felicitas Mayinger

Clin Oral Investig· January 2022

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
3
3D printing of dental restorations: Mechanical properties of thermoplastic polymer materials.
Lisa Marie Schönhoff, Felicitas Mayinger, Marlis Eichberger, Elena Reznikova, Bogna Stawarczyk

J Mech Behav Biomed Mater· July 2021

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
F
Fracture Load of Veneered and Monolithic Single-Unit Fixed Dental Prostheses Made from the High-Performance Thermoplastic Polyphenylene Sulfone.
Felicitas Mayinger, Marlis Eichberger, Lisa Marie Schönhoff, Bogna Stawarczyk

Int J Prosthodont· May 2021

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
E
Edge chipping resistance of veneering composite resins.
Parissa Nassary Zadeh, Bogna Stawarczyk, Rüdiger Hampe, Anja Liebermann, Felicitas Mayinger

J Mech Behav Biomed Mater· April 2021

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
B
Bonding Behavior Between Polyetheretherketone and Polymethylmethacrylate Acrylic Denture Polymer.
Felicitas Mayinger, Maximilian Fiebig, Malgorzata Roos, Marlis Eichberger, Nina Lümkemann

J Adhes Dent· April 2021

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
I
Impact of polymerization and storage on the degree of conversion and mechanical properties of veneering resin composites.
Felicitas Mayinger, Marcel Reymus, Anja Liebermann, Marc Richter, Patrick Kubryk

Dent Mater J· March 2021

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
I
Impact of High-Speed Sintering of Three-Unit 3Y-TZP and 4Y-TZP Fixed Dental Prostheses on Fracture Load With and Without Artificial Aging.
Felicitas Mayinger, Regina Pfefferle, Axel Reichert, Bogna Stawarczyk

Int J Prosthodont· February 2021

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis