Publications by authors named "Janusz Torzewski"

Claim this Profile
T
The Influence of Rolling Direction and Dynamic Strengthening on the Properties of Steel.
Jakub Pokropek, Janusz Kluczyński, Bartłomiej Sarzyński, Katarzyna Jasik, Ireneusz Szachogłuchowicz, Janusz Torzewski

Materials (Basel)· August 2025

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
S
Strength and Electrostatic Discharge Resistance Analysis of Additively Manufactured Polyethylene Terephthalate Glycol (PET-G) Parts for Potential Electronic Application.
Julia Talecka, Janusz Kluczyński, Katarzyna Jasik, Ireneusz Szachogłuchowicz, Janusz Torzewski

Materials (Basel)· August 2024

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
A
An Eco-Friendly and Innovative Approach in Building Engineering: The Production of Cement-Glass Composite Bricks with Recycled Polymeric Reinforcements.
Marcin Małek, Janusz Kluczyński, Katarzyna Jasik, Emil Kardaszuk, Ireneusz Szachogłuchowicz, Janusz Torzewski

Materials (Basel)· February 2024

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
E
Effect of Shot Peening on the Low-Cycle Fatigue Behavior of an AA2519-T62 Friction-Stir-Welded Butt Joint.
Robert Kosturek, Tomasz Ślęzak, Janusz Torzewski, Magdalena Bucior, Władysław Zielecki

Materials (Basel)· November 2023

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
R
Regeneration of the Damaged Parts with the Use of Metal Additive Manufacturing-Case Study.
Piotr Sawczuk, Janusz Kluczyński, Bartłomiej Sarzyński, Ireneusz Szachogłuchowicz, Katarzyna Jasik, Janusz Torzewski

Materials (Basel)· May 2023

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
P
Process Parameter Investigation and Torsional Strength Analysis of the Additively Manufactured 3D Structures Made of 20MnCr5 Steel.
Bartłomiej Sarzyński, Janusz Kluczyński, Jakub Łuszczek, Krzysztof Grzelak, Ireneusz Szachogłuchowicz, Janusz Torzewski

Materials (Basel)· February 2023

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
P
Performance Properties of Cement-Glass Composite Bricks (CGCB) with Additively Manufactured (AM) Polymeric Scaffolding.
Marcin Małek, Janusz Kluczyński, Waldemar Łasica, Mateusz Jackowski, Ireneusz Szachogłuchowicz, Janusz Torzewski

Materials (Basel)· February 2023

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
P
Processability of 21NiCrMo2 Steel Using the Laser Powder Bed Fusion: Selection of Process Parameters and Resulting Mechanical Properties.
Jakub Łuszczek, Lucjan Śnieżek, Krzysztof Grzelak, Janusz Kluczyński, Janusz Torzewski

Materials (Basel)· December 2022

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
E
Effect of Welding Parameters on Mechanical Properties and Microstructure of Friction Stir Welded AA7075-T651 Aluminum Alloy Butt Joints.
Robert Kosturek, Janusz Torzewski, Marcin Wachowski, Lucjan Śnieżek

Materials (Basel)· August 2022

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
A
A Comparative Study on Laser Powder Bed Fusion of Differently Atomized 316L Stainless Steel.
Krzysztof Grzelak, Marcin Bielecki, Janusz Kluczyński, Ireneusz Szachogłuchowicz, Lucjan Śnieżek, Janusz Torzewski

Materials (Basel)· July 2022

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
B
Bending Strength of Polyamide-Based Composites Obtained during the Fused Filament Fabrication (FFF) Process.
Michał Mazurkiewicz, Janusz Kluczyński, Katarzyna Jasik, Bartłomiej Sarzyński, Ireneusz Szachogłuchowicz, Janusz Torzewski

Materials (Basel)· July 2022

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
M
Microstructure and Mechanical Properties of Dissimilar Friction Stir Welded Joint AA7020/AA5083 with Different Joining Parameters.
Janusz Torzewski, Magdalena Łazińska, Krzysztof Grzelak, Ireneusz Szachogłuchowicz, Janusz Mierzyński

Materials (Basel)· March 2022

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
A
Additive Manufacturing of Plastics Used for Protection against COVID19-The Influence of Chemical Disinfection by Alcohol on the Properties of ABS and PETG Polymers.
Krzysztof Grzelak, Julia Łaszcz, Jakub Polkowski, Piotr Mastalski, Janusz Kluczyński, Janusz Torzewski

Materials (Basel)· August 2021

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
A
AlO/ZrO Materials as an Environmentally Friendly Solution for Linear Infrastructure Applications.
Justyna Zygmuntowicz, Radosław Żurowski, Justyna Tomaszewska, Marcin Wachowski, Janusz Torzewski

Materials (Basel)· May 2021

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
S
Selective Laser Melted M300 Maraging Steel-Material Behaviour during Ballistic Testing.
Ireneusz Szachogłuchowicz, Bartosz Fikus, Krzysztof Grzelak, Janusz Kluczyński, Janusz Torzewski

Materials (Basel)· May 2021

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
M
Modification of Structural Properties Using Process Parameters and Surface Treatment of Monolithic and Thin-Walled Parts Obtained by Selective Laser Melting.
Krzysztof Grzelak, Janusz Kluczyński, Ireneusz Szachogłuchowicz, Jakub Łuszczek, Lucjan Śnieżek, Janusz Torzewski

Materials (Basel)· December 2020

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
T
The Influence of Heat Treatment on Low Cycle Fatigue Properties of Selectively Laser Melted 316L Steel.
Janusz Kluczyński, Lucjan Śnieżek, Krzysztof Grzelak, Janusz Torzewski, Ireneusz Szachogłuchowicz

Materials (Basel)· December 2020

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
R
Research on the Properties and Low Cycle Fatigue of Sc-Modified AA2519-T62 FSW Joint.
Robert Kosturek, Lucjan Śnieżek, Janusz Torzewski, Tomasz Ślęzak, Marcin Wachowski

Materials (Basel)· November 2020

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
M
Mechanical Properties Analysis of the AA2519-AA1050-Ti6Al4V Explosive Welded Laminate.
Ireneusz Szachogluchowicz, Lucjan Sniezek, Tomasz Slezak, Janusz Kluczyński, Krzysztof Grzelak, Janusz Torzewski

Materials (Basel)· September 2020

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
C
Comparison of Different Heat Treatment Processes of Selective Laser Melted 316L Steel Based on Analysis of Mechanical Properties.
Janusz Kluczyński, Lucjan Śnieżek, Krzysztof Grzelak, Artur Oziębło, Krzysztof Perkowski, Janusz Torzewski

Materials (Basel)· August 2020

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
C
Crack Growth Behavior of Additively Manufactured 316L Steel-Influence of Build Orientation and Heat Treatment.
Janusz Kluczyński, Lucjan Śnieżek, Krzysztof Grzelak, Janusz Torzewski, Ireneusz Szachogłuchowicz

Materials (Basel)· July 2020

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
M
Microstructure and Low Cycle Fatigue Properties of AA5083 H111 Friction Stir Welded Joint.
Janusz Torzewski, Krzysztof Grzelak, Marcin Wachowski, Robert Kosturek

Materials (Basel)· May 2020

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
I
Influence of Selective Laser Melting Technological Parameters on the Mechanical Properties of Additively Manufactured Elements Using 316L Austenitic Steel.
Janusz Kluczyński, Lucjan Śnieżek, Krzysztof Grzelak, Jacek Janiszewski, Paweł Płatek, Janusz Torzewski

Materials (Basel)· March 2020

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
T
The Examination of Restrained Joints Created in the Process of Multi-Material FFF Additive Manufacturing Technology.
Janusz Kluczyński, Lucjan Śnieżek, Alexander Kravcov, Krzysztof Grzelak, Pavel Svoboda, Janusz Torzewski

Materials (Basel)· February 2020

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
L
Low Cycle Fatigue Properties of Sc-Modified AA2519-T62 Extrusion.
Robert Kosturek, Lucjan Śnieżek, Janusz Torzewski, Marcin Wachowski

Materials (Basel)· January 2020

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis