Publications by authors named "Linas Jonusauskas"

Claim this Profile
3
3D printing of stents via two-photon polymerization.
Goda Grigorianaitė, Sergėjus Borodinas, Vilma Zigmantaitė, Karolina Limanovskaja, Dovilė Andrijec

Sci Rep· July 2025

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
A
A Spectroscopy Solution for Contactless Conductivity Detection in Capillary Electrophoresis.
Tomas Drevinskas, Audrius Maruška, Hirotaka Ihara, Makoto Takafuji, Linas Jonušauskas

Micromachines (Basel)· November 2024

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
A
Advancing 3D Spheroid Research through 3D Scaffolds Made by Two-Photon Polymerization.
Eglė Vitkūnaitė, Eglė Žymantaitė, Agata Mlynska, Dovilė Andrijec, Karolina Limanovskaja

Bioengineering (Basel)· September 2024

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
P
Peculiarities of Integrating Mechanical Valves in Microfluidic Channels Using Direct Laser Writing.
Lucero Hernandez-Cedillo, Deividas Andriukaitis, Lukas Šerpytis, Tomas Drevinskas, Olga Kornyšova

Appl Bionics Biomech· October 2022

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
F
Fabrication of Microfluidic Tesla Valve Employing Femtosecond Bursts.
Deividas Andriukaitis, Rokas Vargalis, Lukas Šerpytis, Tomas Drevinskas, Olga Kornyšova

Micromachines (Basel)· July 2022

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
R
Rational Design of Microfluidic Glaucoma Stent.
Thomas Graf, Gitanas Kancerevycius, Linas Jonušauskas, Patric Eberle

Micromachines (Basel)· June 2022

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
F
Femtosecond Laser Assisted 3D Etching Using Inorganic-Organic Etchant.
Agnė Butkutė, Greta Merkininkaitė, Tomas Jurkšas, Jokūbas Stančikas, Tomas Baravykas

Materials (Basel)· April 2022

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
O
On-Demand Wettability via Combining fs Laser Surface Structuring and Thermal Post-Treatment.
Deividas Čereška, Arnas Žemaitis, Gabrielius Kontenis, Gedvinas Nemickas, Linas Jonušauskas

Materials (Basel)· March 2022

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
O
Optimization of selective laser etching (SLE) for glass micromechanical structure fabrication.
Agnė Butkutė, Tomas Baravykas, Jokūbas Stančikas, Titas Tičkūnas, Rokas Vargalis

Opt Express· July 2021

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
3
3D Manufacturing of Glass Microstructures Using Femtosecond Laser.
Agnė Butkutė, Linas Jonušauskas

Micromachines (Basel)· April 2021

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
S
Single-chip based contactless conductivity detection system for multi-channel separations.
Audrius Maruška, Tomas Drevinskas, Mantas Stankevičius, Kristina Bimbiraitė-Survilienė, Vilma Kaškonienė

Anal Methods· January 2021

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
D
Dynamic aberration correction via spatial light modulator (SLM) for femtosecond direct laser writing: towards spherical voxels.
Gabrielius Kontenis, Darius Gailevičius, Linas Jonušauskas, Vytautas Purlys

Opt Express· September 2020

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
F
Femtosecond Laser-Based Integration of Nano-Membranes into Organ-on-a-Chip Systems.
Liubov Bakhchova, Linas Jonušauskas, Dovilė Andrijec, Marharyta Kurachkina, Tomas Baravykas

Materials (Basel)· July 2020

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
O
Optical damage thresholds of microstructures made by laser three-dimensional nanolithography: publisher's note.
Agnė Butkutė, Laurynas Čekanavičius, Gabrielius Rimšelis, Darius Gailevičius, Vygantas Mizeikis

Opt Lett· February 2020

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
S
Stitchless support-free 3D printing of free-form micromechanical structures with feature size on-demand.
Linas Jonušauskas, Tomas Baravykas, Dovilė Andrijec, Tomas Gadišauskas, Vytautas Purlys

Sci Rep· November 2019

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
M
Mesoscale laser 3D printing.
Linas Jonušauskas, Darius Gailevičius, Sima Rekštytė, Tommaso Baldacchini, Saulius Juodkazis

Opt Express· May 2019

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
O
Optically Clear and Resilient Free-Form µ-Optics 3D-Printed via Ultrafast Laser Lithography.
Linas Jonušauskas, Darius Gailevičius, Lina Mikoliūnaitė, Danas Sakalauskas, Simas Šakirzanovas

Materials (Basel)· January 2017

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
P
Plasmon assisted 3D microstructuring of gold nanoparticle-doped polymers.
Linas Jonušauskas, Marcus Lau, Peter Gruber, Bilal Gökce, Stephan Barcikowski

Nanotechnology· April 2016

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis