Publications by authors named "Sergey Panin"

Claim this Profile
C
Computer Simulation of the Mechanical Behavior of the 'Zygomatic Bones-Implants-Splinting Bar-Removable Overdenture' Dental Structure Under Operational Loads.
Magomed Magomedov, Alexander Kozulin, Sergey Arutyunov, Alexey Drobyshev, Timur Dibirov, Sergey Panin

Dent J (Basel)· August 2025

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
E
Effect of Prepreg Composition on the Structure and Shear Strength of PEI/CF Laminates Fabricated by Ultrasonic Additive Manufacturing.
Defang Tian, Vladislav O Alexenko, Dmitry Yu Stepanov, Dmitry G Buslovich, Alexey A Zelenkov, Sergey V Panin

Polymers (Basel)· May 2025

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
R
Radiographic Inspection of Carbon Fiber-Reinforced Polymer Composites (Laminates) with Epoxy and PEEK Binders After Impact and Subsequent Compression Loading.
Pavel V Kosmachev, Dmitry Yu Stepanov, Anton V Tyazhev, Alexander E Vinnik, Alexander V Eremin, Sergey V Panin

Polymers (Basel)· November 2024

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
O
Optimization of 3D Printing Parameters of High Viscosity PEEK/30GF Composites.
Dmitry Yu Stepanov, Yuri V Dontsov, Sergey V Panin, Dmitry G Buslovich, Vladislav O Alexenko

Polymers (Basel)· September 2024

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
T
Tribological Characteristics of Fibrous Polyphthalamide-Based Composites.
Yuanyi Shen, Dmitry G Buslovich, Sergey V Panin, Lyudmila A Kornienko, Pavel V Dobretsov

Polymers (Basel)· August 2024

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
T
The Role of Triboloading Conditions in Tribolayer Formation and Wear Resistance of PES-Based Composites Reinforced with Carbon Fibers.
Defang Tian, Changjun He, Dmitry G Buslovich, Lyudmila A Kornienko, Sergey V Panin

Polymers (Basel)· July 2024

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
P
Prediction of Fatigue Life of Polyetherimide/Carbon Fiber Particulate Composites at Various Maximum Stresses and Filler Contents.
Alexey A Bogdanov, Sergey V Panin

Polymers (Basel)· March 2024

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
A
Application of Neural Network Models with Ultra-Small Samples to Optimize the Ultrasonic Consolidation Parameters for 'PEI Adherend/Prepreg (CF-PEI Fabric)/PEI Adherend' Lap Joints.
Dmitry Y Stepanov, Defang Tian, Vladislav O Alexenko, Sergey V Panin, Dmitry G Buslovich

Polymers (Basel)· February 2024

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
S
Structure and Deformation Behavior of Polyphenylene Sulfide-Based Laminates Reinforced with Carbon Fiber Tapes Activated by Cold Atmospheric Plasma.
Pavel V Kosmachev, Sergey V Panin, Iliya L Panov, Svetlana A Bochkareva

Polymers (Basel)· December 2023

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
R
Ranking Technologies of Additive Manufacturing of Removable Complete Dentures by the Results of Their Mechanical Testing.
Dmitry I Grachev, Igor V Zolotnitsky, Dmitry Yu Stepanov, Alexander A Kozulin, Magomet Sh Mustafaev, Sergey V Panin

Dent J (Basel)· November 2023

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
I
Influence of the Matrix Material and Tribological Contact Type on the Antifriction Properties of Hybrid Reinforced Polyimide-Based Nano- and Microcomposites.
Dmitry G Buslovich, Sergey V Panin, Jiangkun Luo, Ksenya N Pogosyan, Vladislav O Alexenko

Polymers (Basel)· July 2023

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
U
Ultrasonic Welding of PEEK Plates with CF Fabric Reinforcement-The Optimization of the Process by Neural Network Simulation.
Vladislav O Alexenko, Sergey V Panin, Dmitry Yu Stepanov, Anton V Byakov, Alexey A Bogdanov, Konstantin S Panin

Materials (Basel)· March 2023

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
D
Dental Material Selection for the Additive Manufacturing of Removable Complete Dentures (RCD).
Dmitry I Grachev, Evgeny A Chizhmakov, Dmitry Yu Stepanov, Dmitry G Buslovich, Ibragim V Khulaev, Konstantin S Panin, Sergey V Panin

Int J Mol Sci· March 2023

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
E
Effect of Polymer Matrix on Inelastic Strain Development in PI- and PEI-Based Composites Reinforced with Short Carbon Fibers under Low-Cyclic Fatigue.
Sergey V Panin, Alexey A Bogdanov, Alexander V Eremin, Dmitry G Buslovich, Ivan S Shilko

Polymers (Basel)· February 2023

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
O
Optimizing Ultrasonic Welding Parameters for Multilayer Lap Joints of PEEK and Carbon Fibers by Neural Network Simulation.
Sergey V Panin, Dmitry Yu Stepanov, Anton V Byakov

Materials (Basel)· October 2022

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
A
Algorithm for Designing a Removable Complete Denture (RCD) Based on the FEM Analysis of Its Service Life.
Dmitry I Grachev, Nurmukhamet S Ruzuddinov, Anatoliy S Arutyunov, Gadzhi D Akhmedov, Lubov V Dubova, Sergey V Panin

Materials (Basel)· October 2022

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
S
Surface Modification of Carbon Fibers by Low-Temperature Plasma with Runaway Electrons for Manufacturing PEEK-Based Laminates.
Pavel V Kosmachev, Sergey V Panin, Iliya L Panov, Svetlana A Bochkareva

Materials (Basel)· October 2022

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
R
Role of Testing Conditions in Formation of Tribological Layers at Line Contacts of Antifriction CF-Reinforced PI- and PEI-Based Composites.
Sergey V Panin, Jiangkun Luo, Dmitry G Buslovich, Vladislav O Alexenko, Lyudmila A Kornienko

Molecules· September 2022

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
A
An Automated Optical Strain Measurement System for Estimating Polymer Degradation under Fatigue Testing.
Alexey A Bogdanov, Sergey V Panin, Pavel S Lyubutin, Alexander V Eremin, Dmitry G Buslovich

Sensors (Basel)· August 2022

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
E
Estimating Low- and High-Cyclic Fatigue of Polyimide-CF-PTFE Composite through Variation of Mechanical Hysteresis Loops.
Sergey V Panin, Alexey A Bogdanov, Alexander V Eremin, Dmitry G Buslovich, Vladislav O Alexenko

Materials (Basel)· July 2022

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
E
Effect of Transfer Film on Tribological Properties of Anti-Friction PEI- and PI-Based Composites at Elevated Temperatures.
Sergey V Panin, Jiangkun Luo, Dmitry G Buslovich, Vladislav O Alexenko, Filippo Berto

Polymers (Basel)· March 2022

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
H
High Performance Polymer Composites: A Role of Transfer Films in Ensuring Tribological Properties-A Review.
Sergey V Panin, Vladislav O Alexenko, Dmitry G Buslovich

Polymers (Basel)· February 2022

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
E
Experimental-FEM Study on Effect of Tribological Load Conditions on Wear Resistance of Three-Component High-Strength Solid-Lubricant PI-Based Composites.
Sergey V Panin, Jiangkun Luo, Dmitry G Buslovich, Vladislav O Alexenko, Lyudmila A Kornienko

Polymers (Basel)· August 2021

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
D
Deformation Behavior and Fracture Patterns of Laminated PEEK- and PI-Based Composites with Various Carbon-Fiber Reinforcement.
Pavel V Kosmachev, Vladislav O Alexenko, Svetlana A Bochkareva, Sergey V Panin

Polymers (Basel)· July 2021

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
U
UHMWPE-Based Glass-Fiber Composites Fabricated by FDM. Multiscaling Aspects of Design, Manufacturing and Performance.
Sergey V Panin, Dmitry G Buslovich, Yuri V Dontsov, Svetlana A Bochkareva, Lyudmila A Kornienko

Materials (Basel)· March 2021

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis