Publications by authors named "Syed Hammad Mian"

Claim this Profile
F
Fabrication of PLA-Date Fiber Biocomposite via Extrusion Filament Maker for 3D Printing and Its Characterization for Eco-Friendly and Sustainable Applications.
Syed Hammad Mian, Abdulrahman Bin Jumah, Mustafa Saleh, Jabair Ali Mohammed

Polymers (Basel)· October 2025

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
W
Wettability-Driven void suppression and enhanced mechanical performance in Si₃N₄-Reinforced bamboo Fiber epoxy composites using COCOSO and ANN modeling.
M Saravana Kumar, Che-Hua Yang, Khaja Moiduddin, V Kavimani, Adeolu A Adediran, Syed Hammad Mian

Sci Rep· September 2025

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
E
Effects of Silica Nanoparticles on the Piezoelectro-Elastic Response of PZT-7A-Polyimide Nanocomposites: Micromechanics Modeling Technique.
Usama Umer, Mustufa Haider Abidi, Syed Hammad Mian, Fahad Alasim, Mohammed K Aboudaif

Polymers (Basel)· October 2024

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
A
Assessment of consolidative multi-criteria decision making (C-MCDM) algorithms for optimal mapping of polymer materials in additive manufacturing: A case study of orthotic application.
Syed Hammad Mian, Emad Abouel Nasr, Khaja Moiduddin, Mustafa Saleh, Mustufa Haider Abidi

Heliyon· May 2024

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
P
Predicting Mechanical Properties of Polymer Materials Using Rate-Dependent Material Models: Finite Element Analysis of Bespoke Upper Limb Orthoses.
Syed Hammad Mian, Usama Umer, Khaja Moiduddin, Hisham Alkhalefah

Polymers (Basel)· April 2024

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
A
An Insight into the Characteristics of 3D Printed Polymer Materials for Orthoses Applications: Experimental Study.
Syed Hammad Mian, Emad Abouel Nasr, Khaja Moiduddin, Mustafa Saleh, Hisham Alkhalefah

Polymers (Basel)· January 2024

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
P
Polyether-Ether-Ketone (PEEK) and Its 3D-Printed Quantitate Assessment in Cranial Reconstruction.
Khaja Moiduddin, Syed Hammad Mian, Sherif Mohammed Elseufy, Hisham Alkhalefah, Sundar Ramalingam

J Funct Biomater· August 2023

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
F
Finite Element Analysis of Upper Limb Splint Designs and Materials for 3D Printing.
Syed Hammad Mian, Usama Umer, Khaja Moiduddin, Hisham Alkhalefah

Polymers (Basel)· July 2023

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
P
Performance Evaluation of Input Power of Diode Laser on Machined Leather Specimen in Laser Beam Cutting Process.
Tamer Khalaf, Muthuramalingam Thangaraj, Khaja Moiduddin, Vasanth Swaminathan, Syed Hammad Mian

Materials (Basel)· March 2023

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
D
Design, Analysis, and 3D Printing of a Patient-Specific Polyetheretherketone Implant for the Reconstruction of Zygomatic Deformities.
Khaja Moiduddin, Syed Hammad Mian, Usama Umer, Hisham Alkhalefah, Faraz Ahmed

Polymers (Basel)· February 2023

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
M
Modeling Consequences of COVID-19 and Assessing Its Epidemiological Parameters: A System Dynamics Approach.
Ateekh Ur Rehman, Syed Hammad Mian, Yusuf Siraj Usmani, Mustufa Haider Abidi, Muneer Khan Mohammed

Healthcare (Basel)· January 2023

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
S
Self-Propelled Rotary Tools in Hard Turning: Analysis and Optimization via Finite Element Models.
Usama Umer, Syed Hammad Mian, Muneer Khan Mohammed, Mustufa Haider Abidi, Khaja Moiduddin

Materials (Basel)· December 2022

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
A
A Multi-Part Orientation Planning Schema for Fabrication of Non-Related Components Using Additive Manufacturing.
Osama Abdulhameed, Syed Hammad Mian, Khaja Moiduddin, Abdulrahman Al-Ahmari, Naveed Ahmed

Micromachines (Basel)· October 2022

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
T
Tool Wear Prediction When Machining with Self-Propelled Rotary Tools.
Usama Umer, Syed Hammad Mian, Muneer Khan Mohammed, Mustufa Haider Abidi, Khaja Moiduddin

Materials (Basel)· June 2022

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
A
Adaptive Mechanism for Designing a Personalized Cranial Implant and Its 3D Printing Using PEEK.
Syed Hammad Mian, Khaja Moiduddin, Sherif Mohammed Elseufy, Hisham Alkhalefah

Polymers (Basel)· March 2022

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
F
Friction Stir Welding of Thick Plates of 4Y3Gd Mg Alloy: An Investigation of Microstructure and Mechanical Properties.
Khaja Moiduddin, Arshad Noor Siddiquee, Mustufa Haider Abidi, Syed Hammad Mian, Muneer Khan Mohammed

Materials (Basel)· November 2021

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
E
Evaluation of Self-Propelled Rotary Tool in the Machining of Hardened Steel Using Finite Element Models.
Usama Umer, Hossam Kishawy, Mustufa Haider Abidi, Syed Hammad Mian, Khaja Moiduddin

Materials (Basel)· November 2020

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
M
Micromachining of Biolox Forte Ceramic Utilizing Combined Laser/Ultrasonic Processes.
Basem M A Abdo, Syed Hammad Mian, Abdualziz El-Tamimi, Hisham Alkhalefah, Khaja Moiduddin

Materials (Basel)· August 2020

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
A
A comparison study on the design of mirror and anatomy reconstruction technique in maxillofacial region.
Khaja Moiduddin, Abdulrahman Al-Ahmari, Emad S Abouel Nasr, Syed Hammad Mian, Mohammed Al Kindi

Technol Health Care· May 2016

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis