Publications by authors named "Tomasz Merder"

Claim this Profile
N
New design solution for porous plug in the argon steel purging process.
Tomasz Merder, Marek Warzecha, Jacek Pieprzyca, Piotr Warzecha, Mariola Saternus

Sci Rep· July 2025

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
E
Efficiency of aluminium refining on a foundry degassing unit depending on the rotor geometry and the degree of its wear.
Jan Kolínský, Ladislav Socha, Jana Sviželová, Tomáš Prášil, Mariola Saternus, Tomasz Merder

Sci Rep· July 2025

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
S
Surface Tension of Cu-Ti Alloys and Wettability in a Liquid Alloy-Refractory Material-Gaseous Phase System.
Katarzyna Nowinska, Grzegorz Siwiec, Tomasz Matula, Alphonce Wikedzi, Beata Oleksiak, Tomasz Merder

Materials (Basel)· September 2024

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
P
Physical modeling of two-phase liquid-gas processes occurring in the refining ladle for Fe-Si alloy refining process.
Tomasz Merder, Sławomir Kozłowski, Jacek Pieprzyca, Mariola Saternus, Agnieszka Sobianowska-Turek

Sci Rep· July 2024

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
A
Assessment of refining efficiency during the refining cycle in a foundry degassing unit in industrial conditions.
Ladislav Socha, Tomáš Prášil, Karel Gryc, Jana Svizelova, Mariola Saternus, Tomasz Merder

Sci Rep· January 2024

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
M
Model Investigation of Argon Injection into Liquid Steel at Ladle Furnace Station with Using of Innovative Module.
Tomasz Merder, Piotr Warzecha, Jacek Pieprzyca, Marek Warzecha, Robert Wende

Materials (Basel)· December 2023

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
R
Research on the impact of rotor wear on the effectiveness of the aluminium refining process.
Ladislav Socha, Tomáš Prášil, Karel Gryc, Jana Svizelova, Mariola Saternus, Tomasz Merder

Sci Rep· October 2023

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
N
Numerical and Physical Modeling of Liquid Steel Asymmetric Behavior during Non-Isothermal Conditions in a Two-Strand Slab Tundish-"Butterfly Effect".
Adam Cwudziński, Jacek Pieprzyca, Tomasz Merder

Materials (Basel)· October 2023

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
U
Using Physical Modeling to Optimize the Aluminium Refining Process.
Tomáš Prášil, Ladislav Socha, Karel Gryc, Jana Svizelová, Mariola Saternus, Tomasz Merder

Materials (Basel)· October 2022

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
P
Physical and Numerical Modeling of the Impeller Construction Impact on the Aluminum Degassing Process.
Kamil Kuglin, Michał Szucki, Jacek Pieprzyca, Simon Genthe, Tomasz Merder

Materials (Basel)· July 2022

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
I
Impact of Rotor Material Wear on the Aluminum Refining Process.
Tomáš Prášil, Ladislav Socha, Karel Gryc, Jana Svizelová, Mariola Saternus, Tomasz Merder

Materials (Basel)· June 2022

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
P
Physical Modeling of the Impeller Construction Impact on the Aluminum Refining Process.
Mariola Saternus, Tomasz Merder

Materials (Basel)· January 2022

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
P
Physical and Numerical Modeling of the Slag Splashing Process.
Viktor Sinelnikov, Michał Szucki, Tomasz Merder, Jacek Pieprzyca, Dorota Kalisz

Materials (Basel)· April 2021

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
E
Evolution of the Numerical Model Describing the Distribution of Non-Metallic Inclusions in the Tundish.
Tomasz Merder, Jacek Pieprzyca, Marek Warzecha, Piotr Warzecha, Artur Hutny

Materials (Basel)· April 2021

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis