Publications by authors named "Zongjun Tian"

Claim this Profile
A
Analysis of mechanical characteristics and permeability of TPMS and Voronoi porous structure for bone scaffold.
Maimaitijiang Mamuti, Long Chao, Zongjun Tian

Comput Methods Biomech Biomed Engin· November 2025

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
T
The Influence of PBF-LB/M Part Forming Angle and Support Structure Parameters on the Distortion of Oral Stent.
Yang Liu, Deqiao Xie, Yihan Liu, Zongjun Tian, Shimao Shangguan

Materials (Basel)· October 2025

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
3
3D printed barium titanate/calcium silicate composite biological scaffold combined with structural and material properties.
Junnan Wu, Chen Jiao, Hanjiao Yu, Syed Mesum Raza Naqvi, Mengxing Ge, Zongjun Tian

Biomater Adv· April 2024

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
A
Additive Manufacturing of Stretchable Multi-Walled Carbon Nanotubes/Thermoplastic Polyurethanes Conducting Polymers for Strain Sensing.
Fuxi Liu, Dezhi Bai, Deqiao Xie, Fei Lv, Lida Shen, Zongjun Tian

3D Print Addit Manuf· April 2024

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
B
Biocompatibility and antibacterial activity of MgO/Ca3(PO4)2 composite ceramic scaffold based on vat photopolymerization technology.
Mengxing Ge, Deqiao Xie, Youwen Yang, Huixin Liang, Jiasen Gu, Zongjun Tian

Biomater Adv· November 2023

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
S
Sintering densification mechanism and mechanical properties of the 3D-printed high-melting-point-difference magnesium oxide/calcium phosphate composite bio-ceramic scaffold.
Mengxing Ge, Deqiao Xie, Youwen Yang, Zongjun Tian

J Mech Behav Biomed Mater· August 2023

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
I
Intelligent geometry compensation for additive manufactured oral maxillary stent by genetic algorithm and backpropagation network.
Zifan Zhang, Deqiao Xie, Fei Lv, Ruikang Liu, Youwen Yang, Zongjun Tian

Comput Biol Med· May 2023

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
A
An Aerial-Wall Robotic Insect That Can Land, Climb, and Take Off from Vertical Surfaces.
Qian Li, Haoze Li, Huan Shen, Yangguang Yu, Haoran He, Zongjun Tian

Research (Wash D C)· May 2023

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
E
Evaluation of Compressive and Permeability Behaviors of Trabecular-Like Porous Structure with Mixed Porosity Based on Mechanical Topology.
Long Chao, Yangdong He, Jiasen Gu, Deqiao Xie, Youwen Yang, Zongjun Tian

J Funct Biomater· January 2023

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
Z
Zn-doped chitosan/alginate multilayer coatings on porous hydroxyapatite scaffold with osteogenic and antibacterial properties.
Zhijing He, Chen Jiao, Junnan Wu, Jiasen Gu, Huixin Liang, Zongjun Tian

Int J Bioprint· January 2023

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
3
3D printing of flexible strain sensor based on MWCNTs/flexible resin composite.
Dezhi Bai, Fuxi Liu, Deqiao Xie, Fei Lv, Lida Shen, Zongjun Tian

Nanotechnology· November 2022

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
E
Effect of process parameters on microstructures and properties of Al-42Si alloy fabricated by selective laser melting.
Xiaoye Cai, Tong Liu, Xuan Yan, Zonghui Cheng, Lu Pan, Zongjun Tian

Heliyon· June 2022

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
3
3D-printed composite, calcium silicate ceramic doped with CaSO4·2H2O: Degradation performance and biocompatibility.
Hanxu Zhang, Chen Jiao, Zibo Liu, Zhijing He, Mengxing Ge, Zongjun Tian

J Mech Behav Biomed Mater· September 2021

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
D
Design and Compressive Fatigue Properties of Irregular Porous Scaffolds for Orthopedics Fabricated Using Selective Laser Melting.
Lei Zhu, Huixin Liang, Fei Lv, Deqiao Xie, Changjiang Wang, Zongjun Tian

ACS Biomater Sci Eng· April 2021

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
N
Numerical Simulation and Experimental Investigation of Laser Ablation of AlO Ceramic Coating.
Shuang Liu, Zongjun Tian, Lida Shen, Mingbo Qiu

Materials (Basel)· December 2020

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
R
Research on laser-assisted selective metallization of a 3D printed ceramic surface.
Feng Zhao, Chen Jiao, Deqiao Xie, Bin Lu, Mingbo Qiu, Zongjun Tian

RSC Adv· December 2020

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
S
Surface modification enhances interfacial bonding in PLLA/MgO bone scaffold.
Cijun Shuai, Jun Zan, Youwen Yang, Shuping Peng, Wenjing Yang, Zongjun Tian

Mater Sci Eng C Mater Biol Appl· March 2020

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
C
Cause of Angular Distortion in Fusion Welding: Asymmetric Cross-Sectional Profile along Thickness.
Deqiao Xie, Jianfeng Zhao, Huixin Liang, Shuang Liu, Zongjun Tian

Materials (Basel)· December 2018

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
A
Assumption of Constraining Force to Explain Distortion in Laser Additive Manufacturing.
Deqiao Xie, Jianfeng Zhao, Huixin Liang, Zongjun Tian, Lida Shen

Materials (Basel)· November 2018

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
D
Design and Compressive Behavior of Controllable Irregular Porous Scaffolds: Based on Voronoi-Tessellation and for Additive Manufacturing.
Guanjun Wang, Lida Shen, Jianfeng Zhao, Huixin Liang, Deqiao Xie, Zongjun Tian

ACS Biomater Sci Eng· February 2018

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
A
Application of virtual reality technology in clinical medicine.
Lan Li, Fei Yu, Dongquan Shi, Jianping Shi, Zongjun Tian

Am J Transl Res· September 2017

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis