Publications by authors named "Thomas Durig"

Claim this Profile
M
Material-sparing degradation-kinetics model for thermolabile drug stability assessment during twin-screw melt granulation - Insights with gabapentin.
Adwait Pradhan, Fengyuan Yang, Kapish Karan, Thomas Durig, Quyen Schwing

Int J Pharm· April 2025

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
U
Unraveling local heat generation in twin-screw melt granulation.
Niyati Niranjan Kodange, Adwait Pradhan, Fengyuan Yang, Kapish Karan, Quyen Schwing, Thomas Durig

Int J Pharm· April 2025

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
D
Development of poly (lactic-co-glycolic acid) (PLGA) based implants using hot melt extrusion (HME) for sustained release of drugs: The impacts of PLGA's material characteristics.
Fengyuan Yang, Ryan Stahnke, Kamaru Lawal, Cory Mahnen, Patrick Duffy, Thomas Durig

Int J Pharm· September 2024

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
B
Bioresorbable Polyester Coatings with Antifouling and Antimicrobial Properties for Prevention of Biofilm Formation in Early Stage Infections on Ti6Al4V Hard-Tissue Implants.
David Zermeño-Pérez, Hamza Chouirfa, Brian J Rodriguez, Thomas Dürig, Patrick Duffy

ACS Appl Bio Mater· August 2024

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
O
Optimizing twin-screw melt granulation: The role of overflight clearance on granulation behavior.
Adwait Pradhan, Brian Phillips, Fengyuan Yang, Kapish Karan, Thomas Durig

Int J Pharm· March 2024

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
E
Excipients in Pharmaceutical Additive Manufacturing: A Comprehensive Exploration of Polymeric Material Selection for Enhanced 3D Printing.
Christian Muehlenfeld, Patrick Duffy, Fengyuan Yang, David Zermeño Pérez, Firas El-Saleh, Thomas Durig

Pharmaceutics· February 2024

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
P
Physicochemical changes and chemical degradation of gliclazide during twin-screw melt granulation.
Tongzhou Liu, Navpreet Kaur, Beibei Chen, Brian Phillips, Shao-Yu Chang, Thomas Durig

Int J Pharm· May 2022

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
D
Development of an amorphous based sustained release system for apremilast a selective phosphodiesterase 4 (PDE4) inhibitor.
Qiangnan Zhang, Thomas Durig, Benjamin Blass, Reza Fassihi

Int J Pharm· March 2022

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
H
Hot-melt extrusion based sustained release ibrutinib delivery system: An inhibitor of Bruton's Tyrosine Kinase (BTK).
Bayan Alshahrouri, Fengyuan Yang, Quyen Schwing, Thomas Dürig, Reza Fassihi

Int J Pharm· September 2021

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
I
Influence of Plasdone S630 Ultra-an Improved Copovidone on the Processability and Oxidative Degradation of Quetiapine Fumarate Amorphous Solid Dispersions Prepared via Hot-Melt Extrusion Technique.
Arun Butreddy, Sandeep Sarabu, Suresh Bandari, Amol Batra, Kamaru Lawal, Thomas Durig

AAPS PharmSciTech· June 2021

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
H
How Does the Dissimilarity of Screw Geometry Impact Twin-screw Melt Granulation?
Nada Kittikunakorn, Shubhajit Paul, John J Koleng, Tongzhou Liu, Rachel Cook, Thomas Durig

Eur J Pharm Sci· February 2021

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
E
Effect of Hydroxypropyl Cellulose Level on Twin-Screw Melt Granulation of Acetaminophen.
Tongzhou Liu, Shubhajit Paul, Brian T Beeson, Johnny Alexander, Fengyuan Yang, Thomas Durig

AAPS PharmSciTech· August 2020

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
F
Fabrication of Taste-Masked Donut-Shaped Tablets Via Fused Filament Fabrication 3D Printing Paired with Hot-Melt Extrusion Techniques.
Honghe Wang, Nagireddy Dumpa, Suresh Bandari, Thomas Durig, Michael A Repka

AAPS PharmSciTech· August 2020

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
S
Stable amorphous solid dispersions of fenofibrate using hot melt extrusion technology: Effect of formulation and process parameters for a low glass transition temperature drug.
Venkata Raman Kallakunta, Sandeep Sarabu, Suresh Bandari, Amol Batra, Vivian Bi, Thomas Durig

J Drug Deliv Sci Technol· August 2020

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
H
Hypromellose acetate succinate based amorphous solid dispersions via hot melt extrusion: Effect of drug physicochemical properties.
Sandeep Sarabu, Venkata Raman Kallakunta, Suresh Bandari, Amol Batra, Vivian Bi, Thomas Durig

Carbohydr Polym· April 2020

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
D
Development and evaluation of pharmaceutical 3D printability for hot melt extruded cellulose-based filaments.
Jiaxiang Zhang, Pengchong Xu, Anh Q Vo, Suresh Bandari, Fengyuan Yang, Thomas Durig

J Drug Deliv Sci Technol· August 2019

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
T
Taste masking and rheology improvement of drug complexed with beta-cyclodextrin and hydroxypropyl-β-cyclodextrin by hot-melt extrusion.
Lorena F B Malaquias, Lívia C L Sá-Barreto, Daniel O Freire, Izabel C R Silva, Kapish Karan, Thomas Durig

Carbohydr Polym· April 2018

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
H
Hot Melt Extrudates Formulated Using Design Space: One Simple Process for Both Palatability and Dissolution Rate Improvement.
Lorena F B Malaquias, Heidi L Schulte, Juliano A Chaker, Kapish Karan, Thomas Durig

J Pharm Sci· January 2018

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
A
Amorphous-based controlled-release gliclazide matrix system.
Zheng Lu, Yonglai Yang, Rae-Ann Covington, Yunxia Vivian Bi, Thomas Dürig

AAPS PharmSciTech· July 2017

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
D
Development of carvedilol-cyclodextrin inclusion complexes using fluid-bed granulation: a novel solid-state complexation alternative with technological advantages.
Ellen C P Alonso, Karina Riccomini, Luis Antônio D Silva, Daniela Galter, Eliana M Lima, Thomas Durig

J Pharm Pharmacol· October 2016

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
S
Supersaturated controlled release matrix using amorphous dispersions of glipizide.
Zheng Lu, Yonglai Yang, Rae-Ann Covington, Yunxia Vivian Bi, Thomas Dürig

Int J Pharm· September 2016

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
I
Influence of pressurized carbon dioxide on ketoprofen-incorporated hot-melt extruded low molecular weight hydroxypropylcellulose.
Eman A Ashour, Vijay Kulkarni, Bjad Almutairy, Jun-Bom Park, Sejal P Shah, Thomas Durig

Drug Dev Ind Pharm· January 2016

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
I
Investigation of the interactions of enteric and hydrophilic polymers to enhance dissolution of griseofulvin following hot melt extrusion processing.
Ryan C Bennett, Justin M Keen, Yunxia Vivian Bi, Stuart Porter, Thomas Dürig

J Pharm Pharmacol· July 2015

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
D
Development of taste masked caffeine citrate formulations utilizing hot melt extrusion technology and in vitro-in vivo evaluations.
Manjeet B Pimparade, Joseph T Morott, Jun-Bom Park, Vijay I Kulkarni, Soumyajit Majumdar, Thomas Durig

Int J Pharm· June 2015

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis
T
The effects of screw configuration and polymeric carriers on hot-melt extruded taste-masked formulations incorporated into orally disintegrating tablets.
Joseph T Morott, Manjeet Pimparade, Jun-Bom Park, Chelsea P Worley, Soumyajit Majumdar, Thomas Durig

J Pharm Sci· January 2015

Social Media Activity not collected for this article yet.

Sign Up to Request Social Media Analysis